Show simple item record

dc.contributor.advisorLubineau, Gilles*
dc.contributor.authorDiaz, Edwin Hernandez*
dc.date.accessioned2015-07-02T07:34:04Zen
dc.date.available2015-07-02T07:34:04Zen
dc.date.issued2015-06en
dc.identifier.urihttp://hdl.handle.net/10754/558762en
dc.description.abstractEnhancing the effective peel resistance of plastically deforming adhesive joints through laser-based surface micro-machining Edwin Hernandez Diaz Inspired by adhesion examples commonly found in nature, we reached out to examine the effect of different kinds of heterogeneous surface properties that may replicate this behavior and the mechanisms at work. In order to do this, we used pulsed laser ablation on copper substrates (CuZn40) aiming to increase adhesion for bonding. A Yb-fiber laser was used for surface preparation of the substrates, which were probed with a Scanning Electron Microscope (SEM) and X-ray Photoelectron Spectroscopy (XPS). Heterogeneous surface properties were devised through the use of simplified laser micromachined patterns which may induce sequential events of crack arrest propagation, thereby having a leveraging effect on dissipation. The me- chanical performance of copper/epoxy joints with homogeneous and heterogeneous laser micromachined interfaces was then analyzed using the T-peel test. Fractured surfaces were analyzed using SEM to resolve the mechanism of failure and adhesive penetration within induced surface asperities from the treatment. Results confirm positive modifications of the surface morphology and chemistry from laser ablation that enable mechanical interlocking and cohesive failure within the adhesive layer. Remarkable improvements of apparent peel energy, bond toughness, and effective peel force were appreciated with respect to sanded substrates as control samples.en
dc.language.isoenen
dc.subjectLaser ablationen
dc.subjectpatterned surfacesen
dc.subjectcohesive zone modelen
dc.subjectCopper alloysen
dc.subjectepoxyen
dc.titleEnhancing structural integrity of adhesive bonds through pulsed laser surface micro-machiningen
dc.typeThesisen
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Division*
dc.contributor.departmentMechanical Engineering Program*
thesis.degree.grantorKing Abdullah University of Science and Technologyen_GB
dc.contributor.committeememberSamtaney, Ravi*
dc.contributor.committeememberAlfano, Marco*
thesis.degree.disciplineMechanical Engineeringen
thesis.degree.nameMaster of Scienceen
refterms.dateFOA2016-06-29T00:00:00Z


Files in this item

Thumbnail
Name:
EdwinHernandezThesis2.pdf
Size:
4.045Mb
Format:
PDF
Description:
Edwin Thesis
Thumbnail
Name:
Edward Approval and Copyrigth ...
Size:
365.6Kb
Format:
PDF
Description:
Edwin Approval and Copyright Form

This item appears in the following Collection(s)

Show simple item record