• 10-fold enhancement in light-driven water splitting using niobium oxynitride microcone array films

      Shaheen, Basamat; Hafez, Ahmed M.; Banavoth, Murali; Kirmani, Ahmad R.; Amassian, Aram; Mohammed, Omar F.; Allam, Nageh K. (Elsevier BV, 2016-03-26)
      We demonstrate, for the first time, the synthesis of highly ordered niobium oxynitride microcones as an attractive class of materials for visible-light-driven water splitting. As revealed by the ultraviolet photoelectron spectroscopy (UPS), photoelectrochemical and transient photocurrent measurements, the microcones showed enhanced performance (~1000% compared to mesoporous niobium oxide) as photoanodes for water splitting with remarkable stability and visible light activity. © 2016 Elsevier B.V. All rights reserved.
    • 16.1% Efficient Hysteresis-Free Mesostructured Perovskite Solar Cells Based on Synergistically Improved ZnO Nanorod Arrays

      Mahmood, Khalid; Swain, Bhabani Sankar; Amassian, Aram (Wiley-Blackwell, 2015-06)
      Significant efficiency improvements are reported in mesoscopic perovskite solar cells based on the development of a low-temperature solution-processed ZnO nanorod (NR) array exhibiting higher NR aspect ratio, enhanced electron density, and substantially reduced work function than conventional ZnO NRs. These features synergistically result in hysteresis-free, scan-independent, and stabilized devices with an efficiency of 16.1%. Electron-rich, nitrogen-doped ZnO (N:ZnO) NR-based electron transporting materials (ETMs) with enhanced electron mobility produced using ammonium acetate show consistently higher efficiencies by one to three power points than undoped ZnO NRs. Additionally, the preferential electrostatic interaction between the -nonpolar facets of N:ZnO and the conjugated polyelectrolyte polyethylenimine (PEI) has been relied on to promote the hydrothermal growth of high aspect ratio NR arrays and substantially improve the infiltration of the perovskite light absorber into the ETM. Using the same interactions, a conformal PEI coating on the electron-rich high aspect ratio N:ZnO NR arrays is -successfully applied, resulting in a favorable work function shift and altogether leading to the significant boost in efficiency from <10% up to >16%. These results largely surpass the state-of-the-art PCE of ZnO-based perovskite solar cells and highlight the benefits of synergistically combining mesoscale control with doping and surface modification. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
    • 1D goes 2D: A Berezinskii-Kosterlitz-Thouless transition in superconducting arrays of 4-Angstrom carbon nanotubes

      Wang, Zhe; Shi, Wu; Xie, Hang; Zhang, Ting; Wang, Ning; Tang, Zikang; Zhang, Xixiang; Lortz, Rolf W.; Sheng, Ping (Wiley-Blackwell, 2010-10-01)
      We report superconducting resistive transition characteristics for array(s) of coupled 4-Angstrom single wall carbon nanotubes embedded in aluminophosphate-five zeolite. The transition was observed to initiate at 15 K with a slow resistance decrease switching to a sharp, order of magnitude drop between 7.5 and 6.0 K with strong (anisotropic) magnetic field dependence. Both the sharp resistance drop and its attendant nonlinear IV characteristics are consistent with the manifestations of a Berezinskii-Kosterlitz-Thouless transition that establishes quasi long range order in the plane transverse to the c-axis of the nanotubes, leading to an inhomogeneous system comprising 3D superconducting regions connected by weak links. Global coherence is established at below 5 K with the appearance of a well-defined supercurrent gap/low resistance region at 2 K. © 2010 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
    • 2,1,3-benzothiadiazole-5,6-dicarboxylic imide - A versatile building block for additive- and annealing-free processing of organic solar cells with effi ciencies exceeding 8%

      Nielsen, Christian Bergenstof; Ashraf, Raja Shahid; Treat, Neil D.; Schroeder, Bob C.; Donaghey, Jenny E.; White, Andrew J P; Stingelin, Natalie; McCulloch, Iain (Wiley-Blackwell, 2014-12-15)
      A new photoactive polymer comprising benzo[1,2-b:3,4-b′:5,6-d′]trithiophene and 2,1,3-benzothiadiazole-5,6-dicarboxylic imide is reported. The synthetic design allows for alkyl chains to be introduced on both electron-rich and electron-deficient components, which in turn allows for rapid optimization of the alkyl chain substitution pattern. Consequently, the optimized polymer shows a maximum efficiency of 8.3% in organic photovoltaic devices processed in commercially viable fashion without solvent additives, annealing, or device engineering.
    • 2-Methylfuran: A bio-derived octane booster for spark-ignition engines

      Sarathy, Mani; Shankar, Vijai; Tripathi, Rupali; Pitsch, Heinz; Sarathy, Mani (Elsevier BV, 2018-04-02)
      The efficiency of spark-ignition engines is limited by the phenomenon of knock, which is caused by auto-ignition of the fuel-air mixture ahead of the spark-initiated flame front. The resistance of a fuel to knock is quantified by its octane index; therefore, increasing the octane index of a spark-ignition engine fuel increases the efficiency of the respective engine. However, raising the octane index of gasoline increases the refining costs, as well as the energy consumption during production. The use of alternative fuels with synergistic blending effects presents an attractive option for improving octane index. In this work, the octane enhancing potential of 2-methylfuran (2-MF), a next-generation biofuel, has been examined and compared to other high-octane components (i.e., ethanol and toluene). A primary reference fuel with an octane index of 60 (PRF60) was chosen as the base fuel since it closely represents refinery naphtha streams, which are used as gasoline blend stocks. Initial screening of the fuels was done in an ignition quality tester (IQT). The PRF60/2-MF (80/20 v/v%) blend exhibited longer ignition delay times compared to PRF60/ethanol (80/20 v/v%) blend and PRF60/toluene (80/20 v/v%) blend, even though pure 2-MF is more reactive than both ethanol and toluene. The mixtures were also tested in a cooperative fuels research (CFR) engine under research octane number and motor octane number like conditions. The PRF60/2-MF blend again possesses a higher octane index than other blending components. A detailed chemical kinetic analysis was performed to understand the synergetic blending effect of 2-MF, using a well-validated PRF/2-MF kinetic model. Kinetic analysis revealed superior suppression of low-temperature chemistry with the addition of 2-MF. The results from simulations were further confirmed by homogeneous charge compression ignition engine experiments, which established its superior low-temperature heat release (LTHR) suppression compared to ethanol, resulting in better blending octane numbers. This work explores and provides a chemically sound explanation for the potential of 2-MF as an octane enhancer.
    • 2-periodic metal-organic frameworks (MOFs) as supermolecular building layers (SBLs) for making targeted 3-periodic MOFs

      Eddaoudi, Mohamed; Eubank, Jarrod F. (2015-09-22)
      Embodiments of the present disclosure provide for chemical assemblies, multidimensional metal-organic frameworks (MOFs), supermolecular building layers (SBLs), inorganic molecular building blocks (MBBs), organic MBBs (designed ligands), methods of making each, and methods of using each, and the like. In an embodiment, the composition can be used in catalysis, separations, gas storage, and drug delivery.
    • The 2007-8 volcanic eruption on Jebel at Tair island (Red Sea) observed by satellite radar and optical images

      Xu, Wenbin; Jonsson, Sigurjon (Springer Nature, 2014-01-31)
      We use high-resolution optical images and Interferometric Synthetic Aperture Radar (InSAR) data to study the September 2007-January 2008 Jebel at Tair eruption. Comparison of pre- and post-eruption optical images reveals several fresh ground fissures, a new scoria cone near the summit, and that 5.9 ± 0.1 km2 of new lava covered about half of the island. Decorrelation in the InSAR images indicates that lava flowed both to the western and to the northeastern part of the island after the start of the eruption, while later lavas were mainly deposited near the summit and onto the north flank of the volcano. From the InSAR data, we also estimate that the average thickness of the lava flows is 3.8 m, resulting in a bulk volume of around 2.2 × 107 m3. We observe no volcano-wide pre- or post-eruption uplift, which suggests that the magma source may be deep. The co-eruption interferograms, on the other hand, reveal local and rather complex deformation. We use these observations to constrain a tensile dislocation model that represents the dike intrusion that fed the eruption. The model results show that the orientation of the dike is perpendicular to the Red Sea rift, implying that the local stresses within the volcanic edifice are decoupled from the regional stress field. © 2014 Springer-Verlag Berlin Heidelberg.
    • (-201) β-Gallium oxide substrate for high quality GaN materials

      Roqan, Iman S.; Mumthaz Muhammed, Mufasila (SPIE-Intl Soc Optical Eng, 2015-03-13)
      (-201) oriented β-Ga2O3 has the potential to be used as a transparent and conductive substrate for GaN-growth. The key advantages of Ga2O3 are its small lattice mismatches (4.7%), appropriate structural, thermal and electrical properties and a competitive price compared to other substrates. Optical characterization show that GaN layers grown on (-201) oriented β-Ga2O3 are dominated by intense bandedge emission with a high luminescence efficiency. Atomic force microscopy studies show a modest threading dislocation density of ~108 cm-2, while complementary Raman spectroscopy indicates that the GaN epilayer is of high quality with slight compressive strain. Room temperature time-findings suggest that the limitation of the photoluminescence lifetime (~500 ps) is due to nonradiative recombination arising from threading dislocation. Therefore, by optimizing the growth conditions, high quality material with significant optical efficiency can be obtained.
    • The 2015 Wolf volcano (Galápagos) eruption studied using Sentinel-1 and ALOS-2 data

      Xu, Wenbin; Jonsson, Sigurjon; Ruch, Joel; Aoki, Yosuke (Wiley-Blackwell, 2016-09-28)
      An energetic eruption started on 25 May 2015 from a circumferential fissure at the summit of Wolf volcano on Isabela Island, western Galápagos. Further eruptive activity within the Wolf caldera followed in mid-June 2015. As no geodetic observations of earlier eruptions at Wolf exist, this eruption provides an opportunity to study the volcano's magmatic plumbing system for the first time. Here we use interferometric synthetic aperture radar (InSAR) data from both the Sentinel-1A and ALOS-2 satellites to map and analyze the surface deformation at four time periods during the activity. These data allow us to identify the two eruption phases and reveal strong coeruptive subsidence within the Wolf caldera that is superimposed on a larger volcano-wide subsidence signal. Modeling of the surface displacements shows that two shallow magma reservoirs located under Wolf at ~1 km and ~5 km below sea level explain the subsidence and that these reservoirs appear to be hydraulically connected. We also suggest that the transition from the circumferential to the intracaldera eruption may have involved ring fault activity.
    • A 2:1 MUX Based on Multiple MEMS Resonators

      Hafiz, Md Abdullah Al; Kosuru, Lakshmoji; Younis, Mohammad I.; Fariborzi, Hossein (Elsevier BV, 2017-01-09)
      Micro/nano-electromechanical resonator based mechanical computing has recently attracted significant attention. This paper reports a realization of a 2:1 MUX, a concatenable digital logic element, based on electrothermal frequency tuning of electrically connected multiple arch resonators. Toward this, shallow arch shaped microresonators are electrically connected and their resonance frequencies are tuned based on an electrothermal frequency modulation scheme. This study demonstrates that by reconfiguring the same basic building block, the arch microresonator, complex logic circuits can be realized.
    • 2D acoustic-elastic coupled waveform inversion in the Laplace domain

      Bae, Hoseuk; Shin, Changsoo; Cha, Youngho; Choi, Yun Seok; Min, Dongjoo (Wiley-Blackwell, 2010-04)
      Although waveform inversion has been intensively studied in an effort to properly delineate the Earth's structures since the early 1980s, most of the time- and frequency-domain waveform inversion algorithms still have critical limitations in their applications to field data. This may be attributed to the highly non-linear objective function and the unreliable low-frequency components. To overcome the weaknesses of conventional waveform inversion algorithms, the acoustic Laplace-domain waveform inversion has been proposed. The Laplace-domain waveform inversion has been known to provide a long-wavelength velocity model even for field data, which may be because it employs the zero-frequency component of the damped wavefield and a well-behaved logarithmic objective function. However, its applications have been confined to 2D acoustic media.We extend the Laplace-domain waveform inversion algorithm to a 2D acoustic-elastic coupled medium, which is encountered in marine exploration environments. In 2D acoustic-elastic coupled media, the Laplace-domain pressures behave differently from those of 2D acoustic media, although the overall features are similar to each other. The main differences are that the pressure wavefields for acoustic-elastic coupled media show negative values even for simple geological structures unlike in acoustic media, when the Laplace damping constant is small and the water depth is shallow. The negative values may result from more complicated wave propagation in elastic media and at fluid-solid interfaces.Our Laplace-domain waveform inversion algorithm is also based on the finite-element method and logarithmic wavefields. To compute gradient direction, we apply the back-propagation technique. Under the assumption that density is fixed, P- and S-wave velocity models are inverted from the pressure data. We applied our inversion algorithm to the SEG/EAGE salt model and the numerical results showed that the Laplace-domain waveform inversion successfully recovers the long-wavelength structures of the P- and S-wave velocity models from the noise-free data. The models inverted by the Laplace-domain waveform inversion were able to be successfully used as initial models in the subsequent frequency-domain waveform inversion, which is performed to describe the short-wavelength structures of the true models. © 2010 European Association of Geoscientists & Engineers.
    • 2D Electron Gas with 100% Spin-Polarization in the (LaMnO<sub>3</sub>)<sub>2</sub>/(SrTiO<sub>3</sub>)<sub>2</sub> Superlattice under Uniaxial Strain

      Cossu, Fabrizio; Jilili, J.; Schwingenschlögl, Udo (Wiley-Blackwell, 2014-07-28)
      By first-principles calculations we investigate the structural, electronic, and magnetic properties of the (LaMnO3)2/(SrTiO3)2 superlattice. We find that a monoclinic C2h symmetry is energetically favorable and that the spins order ferromagnetically. Under both compressive and tensile uniaxial strain the electronic structure of the superlattice shows a half-metallic character. In particular, a fully spin-polarized two-dimensional electron gas, which traces back to the Ti 3dxy orbitals, is achieved under compressive uniaxial strain. The (LaMnO3)2/(SrTiO3)2 superlattice is analysed with respect to its structure, magnetism, and electronic properties. Our results demonstrate that uniaxial strain in an experimentally accessible range, both tensile and compressive, can be used to induce half-metallicity. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
    • 2D matrix engineering for homogeneous quantum dot coupling in photovoltaic solids

      Xu, Jixian; Voznyy, Oleksandr; Liu, Mengxia; Kirmani, Ahmad R.; Walters, Grant; Munir, Rahim; Abdelsamie, Maged; Proppe, Andrew H.; Sarkar, Amrita; García de Arquer, F. Pelayo; Wei, Mingyang; Sun, Bin; Liu, Min; Ouellette, Olivier; Quintero-Bermudez, Rafael; Li, Jie; Fan, James; Quan, Li Na; Todorovic, Petar; Tan, Hairen; Hoogland, Sjoerd; Kelley, Shana O.; Stefik, Morgan; Amassian, Aram; Sargent, Edward H. (Springer Nature, 2018-04-20)
      Colloidal quantum dots (CQDs) are promising photovoltaic (PV) materials because of their widely tunable absorption spectrum controlled by nanocrystal size1,2. Their bandgap tunability allows not only the optimization of single-junction cells, but also the fabrication of multijunction cells that complement perovskites and silicon 3 . Advances in surface passivation2,4-7, combined with advances in device structures 8 , have contributed to certified power conversion efficiencies (PCEs) that rose to 11% in 2016 9 . Further gains in performance are available if the thickness of the devices can be increased to maximize the light harvesting at a high fill factor (FF). However, at present the active layer thickness is limited to ~300 nm by the concomitant photocarrier diffusion length. To date, CQD devices thicker than this typically exhibit decreases in short-circuit current (JSC) and open-circuit voltage (VOC), as seen in previous reports3,9-11. Here, we report a matrix engineering strategy for CQD solids that significantly enhances the photocarrier diffusion length. We find that a hybrid inorganic-amine coordinating complex enables us to generate a high-quality two-dimensionally (2D) confined inorganic matrix that programmes internanoparticle spacing at the atomic scale. This strategy enables the reduction of structural and energetic disorder in the solid and concurrent improvements in the CQD packing density and uniformity. Consequently, planar devices with a nearly doubled active layer thicknesses (~600 nm) and record values of JSC (32 mA cm-2) are fabricated. The VOC improved as the current was increased. We demonstrate CQD solar cells with a certified record efficiency of 12%.
    • 2D Organic-Inorganic Hybrid Thin Films for Flexible UV-Visible Photodetectors

      Velusamy, Dhinesh Babu; Haque, Mohammed; Parida, Manas R.; Zhang, Fan; Wu, Tao; Mohammed, Omar F.; Alshareef, Husam N. (Wiley-Blackwell, 2017-02-13)
      Flexible 2D inorganic MoS and organic g-CN hybrid thin film photodetectors with tunable composition and photodetection properties are developed using simple solution processing. The hybrid films fabricated on paper substrate show broadband photodetection suitable for both UV and visible light with good responsivity, detectivity, and reliable and rapid photoswitching characteristics comparable to monolayer devices. This excellent performance is retained even after the films are severely deformed at a bending radius of ≈2 mm for hundreds of cycles. The detailed charge transfer and separation processes at the interface between the 2D materials in the hybrid films are confirmed by femtosecond transient absorption spectroscopy with broadband capability.
    • 2D simulation and performance evaluation of bifacial rear local contact c-Si solar cells under variable illumination conditions

      Katsaounis, Theodoros; Kotsovos, Konstantinos; Gereige, Issam; Al-Saggaf, Ahmed; Tzavaras, Athanasios (Elsevier BV, 2017-09-18)
      A customized 2D computational tool has been developed to simulate bifacial rear local contact PERC type PV structures based on the numerical solution of the transport equations through the finite element method. Simulations were performed under various device material parameters and back contact geometry configurations in order to optimize bifacial solar cell performance under different simulated illumination conditions. Bifacial device maximum power output was also compared with the monofacial equivalent one and the industrial standard Al-BSF structure. The performance of the bifacial structure during highly diffused irradiance conditions commonly observed in the Middle East region due to high concentrations of airborne dust particles was also investigated. Simulation results demonstrated that such conditions are highly favorable for the bifacial device because of the significantly increased diffuse component of the solar radiation which enters the back cell surface.
    • 2D Unitary ESPRIT Based Super-Resolution Channel Estimation for Millimeter-Wave Massive MIMO with Hybrid Precoding

      Liao, Anwen; Gao, Zhen; Wu, Yongpeng; Wang, Hua; Alouini, Mohamed-Slim (Institute of Electrical and Electronics Engineers (IEEE), 2017-11-01)
      Millimeter-wave (mmWave) massive multiple-input multiple-output (MIMO) with hybrid precoding is a promising technique for the future 5G wireless communications. Due to a large number of antennas but a much smaller number of radio frequency (RF) chains, estimating the high-dimensional mmWave massive MIMO channel will bring the large pilot overhead. To overcome this challenge, this paper proposes a super-resolution channel estimation scheme based on two-dimensional (2D) unitary ESPRIT algorithm. By exploiting the angular sparsity of mmWave channels, the continuously distributed angle of arrivals/departures (AoAs/AoDs) can be jointly estimated with high accuracy. Specifically, by designing the uplink training signals at both base station (BS) and mobile station (MS), we first use low pilot overhead to estimate a low-dimensional effective channel, which has the same shift-invariance of array response as the high-dimensional mmWave MIMO channel to be estimated. From the low-dimensional effective channel, the superresolution estimates of AoAs and AoDs can be jointly obtained by exploiting the 2D unitary ESPRIT channel estimation algorithm. Furthermore, the associated path gains can be acquired based on the least squares (LS) criterion. Finally, we can reconstruct the high-dimensional mmWave MIMO channel according to the obtained AoAs, AoDs, and path gains. Simulation results have confirmed that the proposed scheme is superior to conventional schemes with a much lower pilot overhead.
    • 3+ and [Sb13Se16Br2] 5+ - Double and quadruple spiro cubanes from ionic liquids

      Ahmed, Ejaz; Breternitz, Joachim; Groh, Matthias Friedrich; Isaeva, Anna A.; Ruck, Michael J. (Wiley-Blackwell, 2014-01-08)
      The reaction of antimony and selenium in the bromine-rich Lewis acidic ionic liquid [BMIm]Br·4.7AlBr3 (BMIm: 1-butyl-3- methylimidazolium) in the presence of a small amount of NbCl5 at 160 °C yielded dark-red crystals of [Sb7Se8Br 2][AlX4]3. For X = Cl0.15(1)Br 0.85(1), the compound is isostructural to [Sb7S 8Br2][AlCl4]3 [P212 121, a = 12.5132(5) Å, b = 17.7394(6) Å, c = 18.3013(6) Å]. For a higher chlorine content, X = Cl 0.58(1)Br0.42(1), a slightly disordered variant with a bisected unit cell is found [P21212, a = 12.3757(3) Å, b = 17.4116(5) Å, c = 9.0420(2) Å]. The [Sb 7Se8Br2]3+ heteropolycation (C 2 symmetry) is a spiro double-cubane with an antimony atom on the shared corner. From this distorted octahedrally coordinated central atom, tricoordinate selenium and antimony atoms alternate in the bonding sequence. The terminal antimony atoms each bind to a bromine atom. Quantum chemical calculations confirm polar covalent Sb-Se bonding within the cubes and indicate three-center, four-electron bonds for the six-coordinate spiro atoms. The calculated charge distribution reflects the electron-donor role of the antimony atoms. The use of a chlorine-rich ionic liquid resulted in the formation of triclinic [Sb13Se16Br2][AlX4] 5 with X = Cl0.80(1)Br0.20(1) [P$\bar {1}$, a = 9.0842(5) Å, b = 19.607(1) Å, c = 21.511(1) Å, α = 64.116(6), β = 79.768(7), γ = 88.499(7)]. The cationic cluster [Sb13Se16Br2]5+ is a bromine-terminated spiro quadruple-cubane. This 31 atom concatenation of four cubes is assumed to be the largest known discrete main group polycation. A similar reaction in a chloride-free system yielded [Sb7Se 8Br2][Sb13Se16Br2] [AlBr4]8. In its monoclinic structure [P2/c, a = 27.214(5) Å, b = 9.383(2) Å, c = 22.917(4) Å, β = 101.68(1)], the two types of polycations alternate in layers along the a axis. In the series [Sb4+3nSe4+4nBr2](2+n)+, these cations are the members with n = 1 and 3. Copyright © 2014 WILEY-VCH Verlag GmbH &amp; Co. KGaA, Weinheim.
    • 3-D numerical investigation of subsurface flow in anisotropic porous media using multipoint flux approximation method

      Negara, Ardiansyah; Salama, Amgad; Sun, Shuyu (Society of Petroleum Engineers (SPE), 2013)
      Anisotropy of hydraulic properties of subsurface geologic formations is an essential feature that has been established as a consequence of the different geologic processes that they undergo during the longer geologic time scale. With respect to petroleum reservoirs, in many cases, anisotropy plays significant role in dictating the direction of flow that becomes no longer dependent only on the pressure gradient direction but also on the principal directions of anisotropy. Furthermore, in complex systems involving the flow of multiphase fluids in which the gravity and the capillarity play an important role, anisotropy can also have important influences. Therefore, there has been great deal of motivation to consider anisotropy when solving the governing conservation laws numerically. Unfortunately, the two-point flux approximation of finite difference approach is not capable of handling full tensor permeability fields. Lately, however, it has been possible to adapt the multipoint flux approximation that can handle anisotropy to the framework of finite difference schemes. In multipoint flux approximation method, the stencil of approximation is more involved, i.e., it requires the involvement of 9-point stencil for the 2-D model and 27-point stencil for the 3-D model. This is apparently challenging and cumbersome when making the global system of equations. In this work, we apply the equation-type approach, which is the experimenting pressure field approach that enables the solution of the global problem breaks into the solution of multitude of local problems that significantly reduce the complexity without affecting the accuracy of numerical solution. This approach also leads in reducing the computational cost during the simulation. We have applied this technique to a variety of anisotropy scenarios of 3-D subsurface flow problems and the numerical results demonstrate that the experimenting pressure field technique fits very well with the multipoint flux approximation method. Furthermore, the numerical results explicitly emphasize that anisotropy could not be ignored for the proper model of subsurface flow.
    • 3-D waveform tomography sensitivity kernels for anisotropic media

      Djebbi, Ramzi; Alkhalifah, Tariq Ali (EAGE Publications, 2014)
      The complications in anisotropic multi-parameter inversion lie in the trade-off between the different anisotropy parameters. We compute the tomographic waveform sensitivity kernels for a VTI acoustic medium perturbation as a tool to investigate this ambiguity between the different parameters. We use dynamic ray tracing to efficiently handle the expensive computational cost for 3-D anisotropic models. Ray tracing provides also the ray direction information necessary for conditioning the sensitivity kernels to handle anisotropy. The NMO velocity and η parameter kernels showed a maximum sensitivity for diving waves which results in a relevant choice of those parameters in wave equation tomography. The δ parameter kernel showed zero sensitivity; therefore it can serve as a secondary parameter to fit the amplitude in the acoustic anisotropic inversion. Considering the limited penetration depth of diving waves, migration velocity analysis based kernels are introduced to fix the depth ambiguity with reflections and compute sensitivity maps in the deeper parts of the model.
    • 3.2 Gigabit-per-second Visible Light Communication Link with InGaN/GaN MQW Micro-photodetector

      Ho, Kang-Ting; Chen, Rui; Liu, Guangyu; Shen, Chao; Holguin Lerma, Jorge Alberto; Al-Saggaf, Abeer A.; Ng, Tien Khee; Alouini, Mohamed-Slim; He, Jr-Hau; Ooi, Boon S. (The Optical Society, 2018-01-29)
      This paper presents the first demonstration of InGaN multiple quantum well (MQW) based micro-photodetectors (µPD) used as the optical receiver in orthogonal frequency-division multiplexing (OFDM) modulated visible communication system (VLC). The 80-µm diameter µPD exhibits a wavelength-selective responsivity in the near-UV to violet regime (374 nm - 408 nm) under a low reverse bias of −3 V. The modulation scheme of 16-quadrature amplitude modulation (16-QAM) OFDM enables the use of frequency response beyond −3 dB cutoff bandwidth of µPD. A record high data rate of 3.2 Gigabit per second (Gpbs) was achieved as a result, which provides the proof-of-concept verification of a viable high speed VLC link.