Analysis of the distribution of magnetic fluid inside tumors by a giant magnetoresistance probe
Supplemental File 1
MetadataShow full item record
AbstractMagnetic fluid hyperthermia (MFH) therapy uses the magnetic component of electromagnetic fields in the radiofrequency spectrum to couple energy to magnetic nanoparticles inside tumors. In MFH therapy, magnetic fluid is injected into tumors and an alternating current (AC) magnetic flux is applied to heat the magnetic fluid- filled tumor. If the temperature can be maintained at the therapeutic threshold of 42C for 30 minutes or more, the tumor cells can be destroyed. Analyzing the distribution of the magnetic fluid injected into tumors prior to the heating step in MFH therapy is an essential criterion for homogenous heating of tumors, since a decision can then be taken on the strength and localization of the applied external AC magnetic flux density needed to destroy the tumor without affecting healthy cells. This paper proposes a methodology for analyzing the distribution of magnetic fluid in a tumor by a specifically designed giant magnetoresistance (GMR) probe prior to MFH heat treatment. Experimental results analyzing the distribution of magnetic fluid suggest that different magnetic fluid weight densities could be estimated inside a single tumor by the GMR probe. 2013 Gooneratne et al.
CitationGooneratne CP, Kurnicki A, Yamada S, Mukhopadhyay SC, Kosel J (2013) Analysis of the Distribution of Magnetic Fluid inside Tumors by a Giant Magnetoresistance Probe. PLoS ONE 8: e81227. doi:10.1371/journal.pone.0081227.
PublisherPublic Library of Science (PLoS)
PubMed Central IDPMC3843682
The following license files are associated with this item:
Except where otherwise noted, this item's license is described as This is an open-access article distributed under the terms of the Creative Commons Attribution License (http://creativecommons.org/licenses/by/3.0/) , which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited.
- Real-time infrared thermography detection of magnetic nanoparticle hyperthermia in a murine model under a non-uniform field configuration.
- Authors: Rodrigues HF, Mello FM, Branquinho LC, Zufelato N, Silveira-Lacerda EP, Bakuzis AF
- Issue date: 2013 Dec
- Focused RF hyperthermia using magnetic fluids.
- Authors: Tasci TO, Vargel I, Arat A, Guzel E, Korkusuz P, Atalar E
- Issue date: 2009 May
- Magnetic fluid hyperthermia (MFH)reduces prostate cancer growth in the orthotopic Dunning R3327 rat model.
- Authors: Johannsen M, Thiesen B, Jordan A, Taymoorian K, Gneveckow U, Waldöfner N, Scholz R, Koch M, Lein M, Jung K, Loening SA
- Issue date: 2005 Aug 1
- A coil system for real-time magnetic fluid hyperthermia microscopy studies.
- Authors: Subramanian M, Miaskowski A, Pearce G, Dobson J
- Issue date: 2016
- Effects of magnetic fluid hyperthermia (MFH) on C3H mammary carcinoma in vivo.
- Authors: Jordan A, Scholz R, Wust P, Fähling H, Krause J, Wlodarczyk W, Sander B, Vogl T, Felix R
- Issue date: 1997 Nov-Dec
Showing items related by title, author, creator and subject.
Observation of Various and Spontaneous Magnetic Skyrmionic Bubbles at Room Temperature in a Frustrated Kagome Magnet with Uniaxial Magnetic AnisotropyHou, Zhipeng; Ren, Weijun; Ding, Bei; Xu, Guizhou; Wang, Yue; Yang, Bing; Zhang, Qiang; Zhang, Ying; Liu, Enke; Xu, Feng; Wang, Wenhong; Wu, Guangheng; Zhang, Xixiang; Shen, Baogen; Zhang, Zhidong (Wiley-Blackwell, 2017-06-07)The quest for materials hosting topologically protected skyrmionic spin textures continues to be fueled by the promise of novel devices. Although many materials have demonstrated the existence of such spin textures, major challenges remain to be addressed before devices based on magnetic skyrmions can be realized. For example, being able to create and manipulate skyrmionic spin textures at room temperature is of great importance for further technological applications because they can adapt to various external stimuli acting as information carriers in spintronic devices. Here, the first observation of skyrmionic magnetic bubbles with variable topological spin textures formed at room temperature in a frustrated kagome Fe3 Sn2 magnet with uniaxial magnetic anisotropy is reported. The magnetization dynamics are investigated using in situ Lorentz transmission electron microscopy, revealing that the transformation between different magnetic bubbles and domains is via the motion of Bloch lines driven by an applied external magnetic field. These results demonstrate that Fe3 Sn2 facilitates a unique magnetic control of topological spin textures at room temperature, making it a promising candidate for further skyrmion-based spintronic devices.
Magnetic Microcapsules: Low-Magnetization Magnetic Microcapsules: A Synergistic Theranostic Platform for Remote Cancer Cells Therapy and Imaging (Part. Part. Syst. Charact. 9/2014)Zhang, Wei; Deng, Lin; Wang, Guangchao; Guo, Xianrong; Li, Qiujin; Zhang, Jianfei; Khashab, Niveen M. (Wiley-Blackwell, 2014-09)
Modulated Magnetic Nanowires for Controlling Domain Wall Motion: Toward 3D Magnetic MemoriesIvanov, Yurii P.; Chuvilin, Andrey; Lopatin, Sergei; Kosel, Jürgen (American Chemical Society (ACS), 2016-05-03)Cylindrical magnetic nanowires are attractive materials for next generation data storage devices owing to the theoretically achievable high domain wall velocity and their efficient fabrication in highly dense arrays. In order to obtain control over domain wall motion, reliable and well-defined pinning sites are required. Here, we show that modulated nanowires consisting of alternating nickel and cobalt sections facilitate efficient domain wall pinning at the interfaces of those sections. By combining electron holography with micromagnetic simulations, the pinning effect can be explained by the interaction of the stray fields generated at the interface and the domain wall. Utilizing a modified differential phase contrast imaging, we visualized the pinned domain wall with a high resolution, revealing its three-dimensional vortex structure with the previously predicted Bloch point at its center. These findings suggest the potential of modulated nanowires for the development of high-density, three-dimensional data storage devices. © 2016 American Chemical Society.