Farooqui, Muhammad Fahad; Shamim, Atif(2015 IEEE International Symposium on Antennas and Propagation & USNC/URSI National Radio Science Meeting, Institute of Electrical and Electronics Engineers (IEEE), 2015-10-26)[Conference Paper]
A novel antenna configuration comprising a helical antenna with an integrated lens is demonstrated in this work. The antenna is manufactured by a unique combination of 3D printing of plastic material (ABS) and inkjet printing of silver nano-particle based metallic ink. The integration of lens enhances the gain by around 7 dB giving a peak gain of about 16.4 dBi at 9.4 GHz. The helical antenna operates in the end-fire mode and radiates a left-hand circularly polarized (LHCP) pattern. The 3-dB axial ratio (AR) bandwidth of the antenna with lens is 3.2 %. Due to integration of lens and fully printed processing, this antenna configuration offers high gain performance and requires low cost for manufacturing.
Zhen, Su; Bilal, Rana Muhammad; Shamim, Atif(2017 International Symposium on Antennas and Propagation (ISAP), Institute of Electrical and Electronics Engineers (IEEE), 2017-12-22)[Conference Paper]
This paper presents for the first time an innovative 3D printed SoP sensor node with temperature, pressure and humidity sensing capabilities. It has an integrated wireless readout through a near isotropic (900MHz) GSM antenna-on-package. This sensor node is connected to the internet for remote monitoring and has the capability of localization. The paper presents the design of antenna-on-package as well as details of the communication and localization system. Fabrication challenges unique to 3D printing and integration of electronics on 3D printed circuit board are also discussed. Finally, the paper presents measurement results of antenna radiation pattern, return loss, localization accuracy and accuracy of sensing parameters.
Karimi, Muhammad Akram; Shamim, Atif(2017 IEEE SENSORS, Institute of Electrical and Electronics Engineers (IEEE), 2018-01-02)[Conference Paper]
An era of ubiquitous motion sensing has just begun. All electronic gadgets ranging from game consoles to mobile phones have some sort of motion sensors in them. In contrast to rigid motion sensing systems, this paper presents a system level description of a wearable 3D motion sensor. The sensing mechanism is based upon well-established magnetic and inertial measurement unit (MIMU), which integrates accelerometer, gyroscope and magnetometer data. Two sensor boards have been integrated within a wearable arm sleeve to capture 3D orientation of the human arm. The sensors have been interfaced with a Bluetooth transceiver chip, which transmits data to a mobile phone app using standard Bluetooth protocol. An android mobile phone app has been developed to display the human arm motion in real time.
Su, Zhen; Ghaffar, Farhan A.; Farooqui, Muhammad Fahad; Bilal, Rana Muhammad; Shamim, Atif(2017 11th European Conference on Antennas and Propagation (EUCAP), Institute of Electrical and Electronics Engineers (IEEE), 2017-06-07)[Conference Paper]
The abundance of mobile wireless devices is giving rise to a new paradigm known as Internet of Things. In this paradigm, wireless devices will be everywhere and communicating with each other. Since they will be oriented randomly in the environment, they should be able to communicate equally in all directions in order to have stable communication link. Hence, compact near isotropic antennas are required, which can enable orientation insensitive communication. In this paper, we propose a simple design methodology to design a compact near-isotropic wire antenna based on equal vector potentials. As a proof of concept, a quarter wavelength monopole antennas has been designed that is wrapped on a 3D-printed box keeping the vector potentials in three orthogonal different directions equal. By optimizing the dimension of the antenna arms, a nearly isotropic radiation pattern is thus achieved. The results show that the antenna has a maximum gain of 2.2dBi at 900 MHz with gain derivation of 9.4dB.
Export search results
The export option will allow you to export the current search results of the entered query to a file. Different
formats are available for download. To export the items, click on the button corresponding with the preferred download format.
By default, clicking on the export buttons will result in a download of the allowed maximum amount of items.
For anonymous users the allowed maximum amount is 50 search results.
To select a subset of the search results, click "Selective Export" button and make a selection of the items you want to export.
The amount of items that can be exported at once is similarly restricted as the full export.
After making a selection, click one of the export format buttons. The amount of items that will be exported is indicated in the bubble next to export format.