Show simple item record

dc.contributor.advisorShamim, Atif
dc.contributor.authorGadalla, Mena N.
dc.date.accessioned2013-02-10T08:05:49Z
dc.date.available2013-02-10T08:05:49Z
dc.date.issued2013-01
dc.identifier.doi10.25781/KAUST-4KKRH
dc.identifier.urihttp://hdl.handle.net/10754/268872
dc.description.abstractIn this work full parametric analysis of nano antennas is presented. To begin with, optical or electronic properties of noble metals such as gold and copper were studied in details to get a clear understanding of their reaction to an incident electromagnetic wave. Complex frequency dependent dielectric functions indicated that in THz metals acts as a dielectric with significant absorption. Simultaneous optimization of the length and the bow angle of a bow-tie antenna resulted in relative electric field intensity enhancement of 8 orders of magnitude for 0.5nm gap and 4 orders of magnitude for 50nm around 28THz resonance frequency. These results are at least 2 orders of magnitude greater than the published optical antennas. Physical reasons behind field localization and intensity enhancement  are  discussed  in  details.  The  solution  of  Maxwell’s  equations  at   the  interface between metallic nano antenna and air is also present in this piece of research. The derived dispersion relation of surface plasmons shows momentum matching at 28.3 THz between free propagating electromagnetic fields’ modes in air and localized modes at the interface. Consequently, Propagating electromagnetic waves are ensured to couple to localized surface propagating modes producing filed enhancement. The integrated SiO2 matching section is theoretically proven to increase transmission to substrate to 75% (compared to 40% without it) which in turn improves the coupled power by 40 times. Nano antennas were fabricated in house using Electron beam lithography with a precise gap of 50nm. In addition, THz diode was designed, fabricated and integrated to the nano antennas to rectify the enhanced THz signal. The integration of the nano diode required a precise overlap of the two arms of the antenna in the rage of 100nm. In order to overcome two arms overlap fabrication challenges, three layer alignment technique was used to produce precise overlap.The THz rectifier was electrically tested and shown high sensitivity and rectification ability without any bias. Finally, nano antenna integrated diode is under optical testing using a 10.6μm Co2 laser at Electro-Optics Lab, Prince Sultan Advanced Technologies Research Institute (PSATRI), King Saud University due to the unavailability of the measurement setup in KAUST.
dc.language.isoen
dc.subjectNanoantenna
dc.subjectnear filed enhancement
dc.subjectRectenna
dc.subjectInfrared Energy
dc.subjectHarvesting Solar Energy
dc.titleNano Antenna Integrated Diode (Rectenna) For Infrared Energy Harvesting
dc.typeThesis
dc.contributor.departmentComputer, Electrical and Mathematical Sciences and Engineering (CEMSE) Division
thesis.degree.grantorKing Abdullah University of Science and Technology
dc.contributor.committeememberFratalocchi, Andrea
dc.contributor.committeememberOoi, Boon S.
thesis.degree.disciplineElectrical Engineering
thesis.degree.nameMaster of Science
refterms.dateFOA2018-06-13T09:41:06Z


Files in this item

Thumbnail
Name:
Mena Gadalla Thesis.pdf
Size:
3.466Mb
Format:
PDF
Description:
Final Thesis

This item appears in the following Collection(s)

Show simple item record