Show simple item record

dc.contributor.advisorPeinemann, Klaus-Viktor
dc.contributor.authorRini, Eki Listya
dc.date.accessioned2011-07-17T09:34:39Z
dc.date.available2011-07-17T09:34:39Z
dc.date.issued2011-05-10
dc.identifier.doi10.25781/KAUST-DGCA7
dc.identifier.urihttp://hdl.handle.net/10754/136191
dc.description.abstractCO2 removal by membrane processes is considerably potential for several applications such as natural gas and synthesis gas purification, enhanced oil recovery application, and carbon dioxide capture in combat against global warming. Dense polymeric membranes are commonly utilized for these type of gas separation applications. Nevertheless, the intrinsic properties of dense polymeric membranes, which commonly characterize by the low gas permeability versus high gas selectivity trade–off or vice versa, is less desirable. In order to meet the increased demand of CO2 removal, a strategy to improve the gas separation performance of a polymeric membrane is investigated in this study. With this regard, mixed matrix membranes in which inorganic non porous fillers are incorporated into a polymeric matrix were prepared to achieve the aforementioned objective. The mixed matrix membranes were prepared from Pebax® block copolymers and PEG POSS® molecules. These hybrid membranes were formed as both dense and multilayer composite membranes. The dense transparent membranes with well–dispersed fillers could be obtained by variation of the solvent mixture. The DSC analyses showed that incorporation of PEG POSS® into Pebax® matrix altered the thermal properties of the matrix. The multilayer composite membranes were then prepared from a PTMSP gutter layer deposited on a PAN porous support and an adjacent hybrid Pebax®/PEG POSS® as the top layer. These hybrid multilayer composite membranes exhibited an enhanced CO2 selectiv4 ity by a factor of two relative to the pure Pebax®. In these hybrid systems, the CO2 separation was presumably enhanced by the high ether oxides content from PEG POSS® that has high affinities for CO2. For particular composition of Pebax® and PEG POSS® concentrations, the PTMSP gutter layer harnessed the CO2 selectivity without losing the CO2 permeation rate. At the same time, these membrane, however, suffered severe adhesion between the gutter layer and the top selective layer, and this problem led to the decreased separation performance. This study showed that the hybrid multilayer composite membrane could be considerably attractive for CO2 removal application if the characteristics of each layer were appropriately matched and optimized.
dc.language.isoen
dc.titleMixed Matrix Composite Membranes Containing POSS Molecules for Carbon Dioxide Removal Application
dc.typeThesis
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Division
thesis.degree.grantorKing Abdullah University of Science and Technology
dc.contributor.committeememberHan, Yu
dc.contributor.committeememberNunes, Suzana Pereira
thesis.degree.disciplineChemical and Biological Engineering
thesis.degree.nameMaster of Science


Files in this item

Thumbnail
Name:
EkiListyaRiniThesis.pdf
Size:
4.656Mb
Format:
PDF
Description:
PDF file

This item appears in the following Collection(s)

Show simple item record