Now showing items 21-40 of 70

    • Mercury Hazard Assessment for Piscivorous Wildlife in Glacier National Park

      Stafford, Craig P.; Downs, Christopher C.; Langner, Heiko W. (Northwest Science, Northwest Scientific Association, 2016-12-14) [Article]
      We examined the mercury hazard posed to selected piscivorous wildlife in Glacier National Park (GNP), Montana. Logging Lake was our focal site where we estimated the dietary mercury concentrations of wildlife (common loon [Gavia immer], American mink [Neovison vison], river otter [Lontra canadensis], and belted kingfisher [Megaceryle alcyon]) by assuming that fishes were consumed in proportion to their relative abundances. To evaluate if Logging Lake provided a suitable baseline for our study, we made geographic comparisons of fish mercury levels and investigated the distribution and abundance of high mercury fishes within GNP. We complimented our assessment by examining selenium:mercury molar ratios in fishes from Logging Lake and Saint Mary Lake. Our results suggest fish consumption does not imperil wildlife from Logging Lake based on published thresholds for adverse mercury effects, but some hazard may exist particularly if there is strong feeding selectivity for the most contaminated species, northern pikeminnow (Ptychocheilus oregonensis). The geographic comparisons of fish mercury levels, together with the distribution and abundance of high mercury fishes within GNP, suggest that Logging Lake provided a relatively protective baseline among our study lakes. Risk may be further reduced by the molar excess of selenium relative to mercury, particularly in the smaller fishes typically consumed by GNP wildlife. Our findings contrast with studies from northeastern US and southeastern Canada where greater mercury hazard to wildlife exists. An emergent finding from our research is that waterborne concentrations of methylmercury may provide limited insight into regional differences in fish mercury levels.
    • Hybrid Perovskite Thin-Film Photovoltaics: In Situ Diagnostics and Importance of the Precursor Solvate Phases

      Munir, Rahim; Sheikh, Arif D.; Abdelsamie, Maged; Hu, Hanlin; Yu, Liyang; Zhao, Kui; Kim, Taesoo; El Tall, Omar; Li, Ruipeng; Smilgies, Detlef-M.; Amassian, Aram (Advanced Materials, Wiley, 2016-11-07) [Article]
      Solution-processed hybrid perovskite semiconductors attract a great deal of attention, but little is known about their formation process. The one-step spin-coating process of perovskites is investigated in situ, revealing that thin-film formation is mediated by solid-state precursor solvates and their nature. The stability of these intermediate phases directly impacts the quality and reproducibility of thermally converted perovskite films and their photovoltaic performance.
    • Engineering of CH 3 NH 3 PbI 3 Perovskite Crystals by Alloying Large Organic Cations for Enhanced Thermal Stability and Transport Properties

      Peng, Wei; Miao, Xiaohe; Adinolfi, Valerio; Alarousu, Erkki; El Tall, Omar; Emwas, Abdul-Hamid M.; Zhao, Chao; Walters, Grant; Liu, Jiakai; Ouellette, Olivier; Pan, Jun; Banavoth, Murali; Sargent, Edward H.; Mohammed, Omar F.; Bakr, Osman (Angewandte Chemie International Edition, Wiley-Blackwell, 2016-07-28) [Article]
      The number of studies on organic–inorganic hybrid perovskites has soared in recent years. However, the majority of hybrid perovskites under investigation are based on a limited number of organic cations of suitable sizes, such as methylammonium and formamidinium. These small cations easily fit into the perovskite's three-dimensional (3D) lead halide framework to produce semiconductors with excellent charge transport properties. Until now, larger cations, such as ethylammonium, have been found to form 2D crystals with lead halide. Here we show for the first time that ethylammonium can in fact be incorporated coordinately with methylammonium in the lattice of a 3D perovskite thanks to a balance of opposite lattice distortion strains. This inclusion results in higher crystal symmetry, improved material stability, and markedly enhanced charge carrier lifetime. This crystal engineering strategy of balancing opposite lattice distortion effects vastly increases the number of potential choices of organic cations for 3D perovskites, opening up new degrees of freedom to tailor their optoelectronic and environmental properties.
    • Selective Oxidation of Glycerol to Glyceric Acid in Base-Free Aqueous Solution at Room Temperature Catalyzed by Platinum Supported on Carbon Activated with Potassium Hydroxide

      Tan, Hua; El Tall, Omar; Liu, Zhaohui; Wei, Nini; Yapici, Tahir; Zhan, Tong; Hedhili, Mohamed N.; Han, Yu (ChemCatChem, Wiley, 2016-04-18) [Article]
      Pt supported on KOH-activated mesoporous carbon (K-AMC) was used to catalyze glycerol oxidation under base-free conditions at room temperature. To study the relationship between the carbon surface chemistry and the catalytic performance of the K-AMC-based Pt catalysts, different levels of surface oxygen functional groups (SOFGs) on the AMC supports were induced by thermal treatment at different temperatures under inert or H2 gas. A strong effect of the surface chemistry was observed on AMC-supported Pt catalysts for glycerol oxidation. The presence of carboxylic acid groups impedes the adsorption of glycerol, which leads to the reduction of catalytic activity, whereas the presence of high-desorption-temperature SOFGs, such as phenol, ether, and carbonyl/quinone groups, provide hydrophilicity to the carbon surface that improves the adsorption of glycerol molecules on Pt metal surface, which is beneficial for the catalytic activity. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.
    • Nanoporous amide networks based on tetraphenyladamantane for selective CO2capture

      Zulfiqar, Sonia; Mantione, Daniele; El Tall, Omar; Sarwar, Muhammad Ilyas; Ruipérez, Fernando; Rothenberger, Alexander; Mecerreyes, David (J. Mater. Chem. A, Royal Society of Chemistry (RSC), 2016) [Article]
      Reduction of anthropogenic CO2 emissions and CO2 separation from post-combustion flue gases are among the imperative issues in the spotlight at present. Hence, it is highly desirable to develop efficient adsorbents for mitigating climate change with possible energy savings. Here, we report the design of a facile one pot catalyst-free synthetic protocol for the generation of three different nitrogen rich nanoporous amide networks (NANs) based on tetraphenyladamantane. Besides the porous architecture, CO2 capturing potential and high thermal stability, these NANs possess notable CO2/N2 selectivity with reasonable retention while increasing the temperature from 273 K to 298 K. The quantum chemical calculations also suggest that CO2 interacts mainly in the region of polar amide groups (-CONH-) present in NANs and this interaction is much stronger than that with N2 thus leading to better selectivity and affirming them as promising contenders for efficient gas separation. © The Royal Society of Chemistry 2016.
    • A process to enhance the specific surface area and capacitance of hydrothermally reduced graphene oxide

      Alazmi, Amira; El Tall, Omar; Rasul, Shahid; Hedhili, Mohamed N.; Patole, Shashikant P.; Da Costa, Pedro M. F. J. (Nanoscale, Royal Society of Chemistry (RSC), 2016) [Article]
      The impact of post-synthesis processing in reduced graphene oxide materials for supercapacitor electrodes has been analyzed. A comparative study of vacuum, freeze and critical point drying was carried out for hydrothermally reduced graphene oxide demonstrating that the optimization of the specific surface area and preservation of the porous network are critical to maximize its supercapacitance performance. As described below, using a supercritical fluid as the drying medium, unprecedented values of the specific surface area (364 m2 g−1) and supercapacitance (441 F g−1) for this class of materials have been achieved.
    • An evaluation of microwave-assisted fusion and microwave-assisted acid digestion methods for determining elemental impurities in carbon nanostructures using inductively coupled plasma optical emission spectrometry

      Patole, Shashikant P.; Simões, Filipa; Yapici, Tahir; Warsama, Bashir H.; Anjum, Dalaver H.; Da Costa, Pedro M. F. J. (Talanta, Elsevier BV, 2015-10-25) [Article]
      It is common for as-prepared carbon nanotube (CNT) and graphene samples to contain remnants of the transition metals used to catalyze their growth; contamination may also leave other trace elemental impurities in the samples. Although a full quantification of impurities in as-prepared samples of carbon nanostructures is difficult, particularly when trace elements are intercalated or encapsulated within a protective layer of graphitic carbon, reliable information is essential for reasons such as quantifying the adulteration of physico-chemical properties of the materials and for evaluating environmental issues. Here, we introduce a microwave-based fusion method to degrade single- and double-walled CNTs and graphene nanoplatelets into a fusion flux thereby thoroughly leaching all metallic impurities. Subsequent dissolution of the fusion product in diluted hydrochloric and nitric acid allowed us to identify their trace elemental impurities using inductively coupled plasma optical emission spectrometry. Comparisons of the results from the proposed microwave-assisted fusion method against those of a more classical microwave-assisted acid digestion approach suggest complementarity between the two that ultimately could lead to a more reliable and less costly determination of trace elemental impurities in carbon nanostructured materials. Graphical abstract A method for the complete digestion of carbon nanostructures has been demonstrated. Photographs (on the left side) show zirconium crucibles containing SWCNTs with flux of Na2CO3 and K2CO3, before and after microwave fusion; (on the right side) the appearance of the final solutions containing dissolved samples, from microwave-assisted fusion and microwave-assisted acid digestion. These solutions were used for determining the trace elemental impurities by ICP‒OES.
    • The Arabidopsis gene DIG6 encodes a large 60S subunit nuclear export GTPase 1 that is involved in ribosome biogenesis and affects multiple auxin-regulated development processes

      Zhao, Huayan; Lü, Shiyou; Li, Ruixi; Chen, Tao; Zhang, Huoming; Cui, Peng; Ding, Feng; Liu, Pei-Nian; Wang, Guangchao; Xia, Yiji; Running, Mark P.; Xiong, Liming (Journal of Experimental Botany, Oxford University Press (OUP), 2015-08-13) [Article]
      The circularly permuted GTPase large subunit GTPase 1 (LSG1) is involved in the maturation step of the 60S ribosome and is essential for cell viability in yeast. Here, an Arabidopsis mutant dig6 (drought inhibited growth of lateral roots) was isolated. The mutant exhibited multiple auxin-related phenotypes, which included reduced lateral root number, altered leaf veins, and shorter roots. Genetic mapping combined with next-generation DNA sequencing identified that the mutation occurred in AtLSG1-2. This gene was highly expressed in regions of auxin accumulation. Ribosome profiling revealed that a loss of function of AtLSG1-2 led to decreased levels of monosomes, further demonstrating its role in ribosome biogenesis. Quantitative proteomics showed that the expression of certain proteins involved in ribosome biogenesis was differentially regulated, indicating that ribosome biogenesis processes were impaired in the mutant. Further investigations showed that an AtLSG1-2 deficiency caused the alteration of auxin distribution, response, and transport in plants. It is concluded that AtLSG1-2 is integral to ribosome biogenesis, consequently affecting auxin homeostasis and plant development.
    • Room Temperature Reactivity Of Silicon Nanocrystals With Solvents: The Case Of Ketone And Hydrogen Production From Secondary Alcohols: Catalysis?

      El Demellawi, Jehad K.; Holt, Christopher; Abou-Hamad, Edy; Al-Talla, Zeyad; Saih, Youssef; Chaieb, Saharoui (ACS Applied Materials & Interfaces, American Chemical Society (ACS), 2015-06-17) [Article]
      Although silicon nanoparticles dispersed in liquids are used in various applications ranging from bio-labeling to hydrogen production, their reactivities with their solvents and their catalytic properties re-main still unexplored. Here, we discovered that, because of their surface structures and mechanical strain, silicon nanoparticles react strongly with their solvents and may act as catalysts for the dehydrogenation, at room temperature, of secondary alcohols (e.g. isopropanol) to ketones and hydrogen. This catalytic reaction was followed by gas chromatography, pH measurements, mass spectroscopy and solidstate NMR. This discovery provides new understanding of the role played by silicon nanoparticles, and nanosilicon in general, in their stability in solvents in general as well as being candidates in catalysis.
    • Genome Sequence of Anoxybacillus flavithermus Strain AK1, a Thermophile Isolated from a Hot Spring in Saudi Arabia

      Khalil, Amjad B.; Neelamegam, Sivakumar; Alqarawi, Sami (Genome Announcements, American Society for Microbiology, 2015-06-04) [Article]
      Anoxybacillus flavithermus strain AK1 was isolated from Al-Ain Alhara, a thermal hot spring located 50 km southeast of the city of Gazan, Saudi Arabia (16°56ʹN, 43°15ʹE). The sequenced and annotated genome is 2,630,664 bp and encodes 2,799 genes.
    • Synthesis and characterization of some novel 1,2,4-triazoles, 1,3,4-thiadiazoles and Schiff bases incorporating imidazole moiety as potential antimicrobial agents

      Aouad, Mohamed Reda; Messali, Mouslim; Rezki, Nadjet; Ali, Adeeb Al-Sheikh; Lesimple, Alain (Acta Pharmaceutica, Walter de Gruyter GmbH, 2015-05-26) [Article]
      (1,4,5-Triphenylimidazol-2-yl-thio)butyric acid hydrazide (3) was obtained via alkylation of 1,4,5-triphenylimidazol-2- thiol (1) with ethylbromobutyrate, followed by addition of hydrazine hydrate. Treatment of acid hydrazide 3 with carbon disulfide in an ethanolic potassium hydroxide solution gave the intermediate potassium dithiocarbazinate salt, which was cyclized to 4-amino-5-[(1,4,5-triphenylimidazol- -2-yl)thiopropyl]-2H-1,2,4-triazole-3-thione (4) in the presence of hydrazine hydrate. Condensation of compound 3 with alkyl/arylisothiocyanate afforded the corresponding 1-[4-(1,4,5-triphenylimidazol-2-ylthio)butanoyl]-4-alkyl/arylthiosemicarbazides (5-7), which upon refluxing with sodium hydroxide, yielded the corresponding 1,2,4-triazole - -3-thiols 8-10. Under acidic conditions, compounds 4-6 were converted to aminothiadiazoles 11-13. Moreover, the series of Schiff bases 14-18 were synthesized from the condensation of compound 3 with different aromatic aldehydes. The newly synthesized compounds were characterized by IR, 1H NMR, 13C NMR and mass spectral analyses. They were also preliminarily screened for their antimicrobial activity.
    • Probing droplets with biological colloidal suspensions on smart surfaces by synchrotron radiation micro- and nano-beams

      Marinaro, Giovanni; Accardo, Angelo; Benseny-Cases, Núria; Burghammer, Manfred C.; Castillo-Michel, Hiram A.; Cotte, Marine; Dante, Silvia; De Angelis, Francesco De; Di Cola, Emanuela; Di Fabrizio, Enzo M.; Hauser, C.; Riekel, Christian (Optics and Lasers in Engineering, Elsevier BV, 2015-04-08) [Article]
      Droplets with colloidal biological suspensions evaporating on substrates with defined wetting properties generate confined environments for initiating aggregation and self-assembly processes. We describe smart micro- and nanostructured surfaces, optimized for probing single droplets and residues by synchrotron radiation micro- and nanobeam diffraction techniques. Applications are presented for Ac-IVD and β-amyloid (1-42) peptides capable of forming cross-β sheet structures. Complementary synchrotron radiation FTIR microspectroscopy addresses secondary structure formation. The high synchrotron radiation source brilliance enables fast raster-scan experiments. © 2015 Elsevier Ltd.
    • Unfolding a molecular trefoil derived from a zwitterionic metallopeptide to form self-assembled nanostructures

      Zhang, Ye; Zhou, Ning; Shi, Junfeng; Pochapsky, Susan Sondej; Pochapsky, Thomas C.; Zhang, Bei; Zhang, Xixiang; Xu, Bing (Nature Communications, Springer Nature, 2015-02-19) [Article]
      While used extensively by nature to control the geometry of protein structures, and dynamics of proteins, such as self-organization, hydration forces and ionic interactions received less attention for controlling the behaviour of small molecules. Here we describe the synthesis and characterization of a novel zwitterionic metallopeptide consisting of a cationic core and three distal anionic groups linked by self-assembling peptide motifs. 2D NMR spectra, total correlated spectroscopy and nuclear Overhauser effect spectroscopy, show that the molecule exhibits a three-fold rotational symmetry and adopts a folded conformation in dimethyl sulfoxide due to Coulombic forces. When hydrated in water, the molecule unfolds to act as a self-assembling building block of supramolecular nanostructures. By combining ionic interactions with the unique geometry from metal complex and hydrophobic interactions from simple peptides, we demonstrate a new and effective way to design molecules for smart materials through mimicking a sophisticated biofunctional system using a conformational switch.
    • Directed Growth of Virus Nanofilaments on a Superhydrophobic Surface

      Marinaro, Giovanni; Burghammer, Manfred; Costa, Luca; Dane, Thomas; De Angelis, Francesco; Di Fabrizio, Enzo M.; Riekel, Christian (ACS Applied Materials & Interfaces, American Chemical Society (ACS), 2015-01-20) [Article]
      The evaporation of single droplets of colloidal tobacco mosaic virus (TMV) nanoparticles on a superhydrophobic surface with a hexagonal pillar-pattern results in the formation of coffee-ring type residues. We imaged surface features by optical, scanning electron, and atomic force microscopies. Bulk features were probed by raster-scan X-ray nanodiffraction. At ∼100 pg/μL nanoparticle concentration, the rim of the residue connects to neighboring pillars via fibrous extensions containing flow-aligned crystalline domains. At ∼1 pg/μL nanoparticle concentration, nanofilaments of ¥80 nm diameter and ∼20 μm length are formed, extending normal to the residue-rim across a range of pillars. X-ray scattering is dominated by the nanofilament form-factor but some evidence for crystallinity has been obtained. The observation of sheets composed of stacks of self-assembled nanoparticles deposited on pillars suggests that the nanofilaments are drawn from a structured droplet interface. © 2015 American Chemical Society.
    • Palladium-Catalyzed Direct C-H Arylations of Dioxythiophenes Bearing Reactive Functional Groups: A Step-Economical Approach for Functional π-Conjugated Oligoarenes

      Liu, Ching-Yuan; Chong, Hui; Lin, Hsing-An; Yamashita, Yoshiro; Zheng, Bin; Huang, Kuo-Wei; Hashizume, Daisuke; Yu, Hsiao-hua (Org. Biomol. Chem., Royal Society of Chemistry (RSC), 2015) [Article]
      A Pd-catalyzed and single-step C-H arylation of dioxythiophene derivates bearing unprotected reactive functional groups (-OH, -COOH, -N3) in a phosphine-free manner has been developed. Various dioxythiopene-based oligoarenes with extended π-conjugation are obtained with good yields (up to 90%). These oligoarenes display suitable optical properties (absorption and emission maxima, quantum yields) and contain reactive functional groups suitable for further conjugations with bioactive molecules. This new methodology is step economical (fewer synthetic steps), environmental friendly (no toxic metal-containing side-poducts) and the oligoarenes synthesized are potentially applicable for bio-labeling, bioimaging, and biosensing.
    • Poly-thiosemicarbazide membrane for gold recovery

      Villalobos, Luis Francisco; Yapici, Tahir; Peinemann, Klaus-Viktor (Separation and Purification Technology, Elsevier BV, 2014-11) [Article]
      A novel polymeric membrane adsorber with a high density of adsorption sites that can selectively capture Au(III) ions, is proposed as an efficient alternative to recover gold from dilute solutions. Poly-thiosemicarbazide (PTSC), a polymer that contains one chelate site per monomeric unit, was used to fabricate the membranes. This polymer can be easily processed into membranes by a phase inversion technique, resulting in an open and interconnected porous structure suitable for high flux liquid phase applications. This method overcomes the usual low capacities of membrane adsorbents by selecting a starting material that contains the adsorption sites within it, therefore avoiding the necessity to add an external agent into the membrane matrix. The resulting mechanically stable PTSC membranes can operate in a pressure driven permeation process, which eliminates the diffusion limitations commonly present in packed column adsorption processes. This process can selectively recover 97% of the gold present in a solution containing a 9-fold higher copper concentration, while operating at a flux as high as 1868 L/m2 h. The maximum gold uptake measured without sacrificing the mechanical stability of the membrane was 5.4 mmol Au/g. Furthermore the gold can be easily eluted from the membrane with a 0.1 M thiourea solution and the membrane can be reused for at least three cycles without any decrease in its performance. Finally, the ability of this membrane for recovering metals from real-life samples, like seawater and tap water, was tested with promising results.
    • The formation of [M-H]+ ions in N-alkyl-substituted thieno[3,4-c]-pyrrole-4,6-dione derivatives during atmospheric pressure photoionization mass spectrometry

      Sioud, Salim; Kharbatia, Najeh M.; Amad, Maan H.; Zhu, Zhiyong; Cabanetos, Clement; Lesimple, Alain; Beaujuge, Pierre (Rapid Communications in Mass Spectrometry, Wiley, 2014-10-09) [Article]
      RESULTS [M-H]+ ions were observed under APPI conditions. The type of dopant and the length of the alkyl chain affected the formation of these ions. MS/MS fragmentation of [M-H]+ and [M + H]+ ions exhibited completely different patterns. Theoretical calculations revealed that the loss of hydrogen molecules from the [M + H]+ ions is the most favourable condition under which to form [M-H]+ ions.CONCLUSIONS [M-H]+ ions were detected in all the TPD derivatives studied here under the special experimental conditions during APPI, using a halogenated benzene dopant, and TPD containing substituted N-alkyl side chains with a minimum of four carbon atoms. Density functional theory calculations showed that for [M-H]+ ions to be formed under these conditions, the loss of hydrogen molecules from the [M + H]+ ions is proposed to be necessary.RATIONALE The formation of ions during atmospheric pressure photoionization (APPI) mass spectrometry in the positive mode usually provides radical cations and/or protonated species. Intriguingly, during the analysis of some N-alkyl-substituted thieno[3,4-c]pyrrole-4,6-dione (TPD) derivatives synthesized in our laboratory, unusual [M-H]+ ion peaks were observed. In this work we investigate the formation of [M-H]+ ions observed under APPI conditions.METHODS Multiple experimental parameters, including the type of ionization source, the composition of the solvent, the type of dopant, the infusion flow rate, and the length of the alkyl side chain were investigated to determine their effects on the formation of [M-H]+ ions. In addition, a comparison study of the gas-phase tandem mass spectrometric (MS/MS) fragmentation of [M + H]+ vs [M-H]+ ions and computational approaches were used.
    • Cyclooctane metathesis catalyzed by silica-supported tungsten pentamethyl [(ΞSiO)W(Me)5]: Distribution of macrocyclic alkanes

      Riache, Nassima; Callens, Emmanuel; Samantaray, Manoja; Kharbatia, Najeh M.; Atiqullah, Muhammad; Basset, Jean-Marie (Chemistry - A European Journal, Wiley, 2014-10-03) [Article]
      Metathesis of cyclic alkanes catalyzed by the new surface complex [(ΞSiO)W(Me)5] affords a wide distribution of cyclic and macrocyclic alkanes. The major products with the formula CnH2n are the result of either a ring contraction or ring expansion of cyclooctane leading to lower unsubstituted cyclic alkanes (5≤n≤7) and to an unprecedented distribution of unsubstituted macrocyclic alkanes (12≤n≤40), respectively, identified by GC/MS and by NMR spectroscopies.
    • Crystal phase transition in LixNa1-xGdF4 solid solution nanocrystals - Tuning of optical properties

      Bański, Mateusz; Afzaal, Mohammad; Cha, Dong Kyu; Wang, X.; Tan, Hua; Misiewicz, Jan J.; Podhorodecki, Artur P. (J. Mater. Chem. C, Royal Society of Chemistry (RSC), 2014-09-29) [Article]
      The influence of precursor composition on the crystallization of LixNa1-xGdF4 is investigated and discussed. Nanocrystals are prepared from the thermal decomposition of trifluoroacetates in the presence of trioctylphosphine oxide to provide control over particle size. A crystal phase transition from hexagonal to cubic and to tetragonal is observed by increasing lithium trifluoroacetate (Li-TFA) in the solution. Controlling the composition of LixNa1-xGdF4 nanocrystals results in modified crystal field symmetry and emission properties from doped europium (Eu3+) ions. We report that for lithium (Li+) substitution <15%, the hexagonal crystal field is preferred, while the Eu3+ emission is already tuned, whereas at higher Li+ substitution, a phase change takes place and the number of crystalline matrix defects increases which is reflected in the optical properties of Eu3+. From Eu3+ emission properties, the optimum Li+ content is determined to be ∼6.2% in the prepared LixNa1-xGdF4 nanocrystals.
    • Comparison of Artemisia annua bioactivities between traditional medicine and chemical extracts

      Nageeb, Ahmed; Altawashi, Azza; Emwas, Abdul-Hamid M.; Al-Talla, Zeyad; Al Rifai, Nahla (Current Bioactive Compounds, Bentham Science Publishers Ltd., 2014-09-21) [Article]
      The present work investigates the efficacy of using Artemisia annua in traditional medicine in comparison with chemical extracts of its bioactive molecules. In addition, the effects of location (Egypt and Jericho) on the bioactivities of the plant were investigated. The results showed that water extracts of Artemisia annua from Jericho have stronger antibacterial activities than organic solvent extracts. In contrast, water and organic solvent extracts of the Artemisia annua from Egypt do not have anti-bacterial activity. Furthermore, while the methanol extract of EA displayed high anticancer affects, the water extract of Egypt and the extracts of Jericho did not show significant anticancer activity. Finally, the results showed that the methanol and water extracts of Jericho had the highest antioxidant activity, while the extracts of Egypt had none. The current results validate the scientific bases for the use of Artemisia annua in traditional medicine. In addition, our results suggest that the collection location of the Artemisia annua has an effect on its chemical composition and bioactivities. - See more at: http://www.eurekaselect.com/121416/article#sthash.2c2j9AoL.dpuf