FDM 3D printed coffee glove embedded with flexible electronic

Handle URI:
http://hdl.handle.net/10754/626070
Title:
FDM 3D printed coffee glove embedded with flexible electronic
Authors:
Bahri, Meznan; Hussain, Muhammad Mustafa ( 0000-0003-3279-0441 ) ; Brahimi, Tayeb; Dahrouj, Hayssam
Abstract:
With the advances in 3D printing technology, Flexible Electronics can now be exploited to form the so-called “Embedded Electronics”. This paper describes experiences learned from a research project which ran during summer 2016 at KAUST, in collaboration with the Electrical and Computer Engineering Department at Effat University, and aimed at creating a heating coffee glove product operating on double alkaline batteries using Kapton© as a flexible substrate for the circuit. The circuit and its batteries are encapsulated in a 3D printed glove, designed using SolidWorks©. The proposed methodology and techniques applied during this work could be further used in implementing other technologies, such as thermoelectric coolers head patches, smart garments, and flexible smartphones. Limitation and recommendation of the present methodology are also discussed.
KAUST Department:
Electrical Engineering Program
Citation:
Bahri M, Hussain MM, Brahimi T, Dahrouj H (2017) FDM 3D printed coffee glove embedded with flexible electronic. 2017 Learning and Technology Conference (L&T) - The MakerSpace: from Imagining to Making! Available: http://dx.doi.org/10.1109/LT.2017.8088126.
Publisher:
IEEE
Journal:
2017 Learning and Technology Conference (L&T) - The MakerSpace: from Imagining to Making!
Issue Date:
31-Oct-2017
DOI:
10.1109/LT.2017.8088126
Type:
Conference Paper
Sponsors:
The present project was prepared under the collaboration of KAUST and the Electrical and Computer Engineering Department at Effat University. The authors gratefully acknowledge their support and express their deepest thanks to KAUST for arranging all facilities to complete this project.
Additional Links:
http://ieeexplore.ieee.org/document/8088126/
Appears in Collections:
Conference Papers; Electrical Engineering Program

Full metadata record

DC FieldValue Language
dc.contributor.authorBahri, Meznanen
dc.contributor.authorHussain, Muhammad Mustafaen
dc.contributor.authorBrahimi, Tayeben
dc.contributor.authorDahrouj, Hayssamen
dc.date.accessioned2017-11-01T06:42:47Z-
dc.date.available2017-11-01T06:42:47Z-
dc.date.issued2017-10-31en
dc.identifier.citationBahri M, Hussain MM, Brahimi T, Dahrouj H (2017) FDM 3D printed coffee glove embedded with flexible electronic. 2017 Learning and Technology Conference (L&T) - The MakerSpace: from Imagining to Making! Available: http://dx.doi.org/10.1109/LT.2017.8088126.en
dc.identifier.doi10.1109/LT.2017.8088126en
dc.identifier.urihttp://hdl.handle.net/10754/626070-
dc.description.abstractWith the advances in 3D printing technology, Flexible Electronics can now be exploited to form the so-called “Embedded Electronics”. This paper describes experiences learned from a research project which ran during summer 2016 at KAUST, in collaboration with the Electrical and Computer Engineering Department at Effat University, and aimed at creating a heating coffee glove product operating on double alkaline batteries using Kapton© as a flexible substrate for the circuit. The circuit and its batteries are encapsulated in a 3D printed glove, designed using SolidWorks©. The proposed methodology and techniques applied during this work could be further used in implementing other technologies, such as thermoelectric coolers head patches, smart garments, and flexible smartphones. Limitation and recommendation of the present methodology are also discussed.en
dc.description.sponsorshipThe present project was prepared under the collaboration of KAUST and the Electrical and Computer Engineering Department at Effat University. The authors gratefully acknowledge their support and express their deepest thanks to KAUST for arranging all facilities to complete this project.en
dc.publisherIEEEen
dc.relation.urlhttp://ieeexplore.ieee.org/document/8088126/en
dc.rights(c) 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works.en
dc.subjectFlexible electronicsen
dc.subjectHeating systemsen
dc.subjectInken
dc.subjectPrintersen
dc.subjectSilveren
dc.subjectThree-dimensional displaysen
dc.subjectThree-dimensional printingen
dc.titleFDM 3D printed coffee glove embedded with flexible electronicen
dc.typeConference Paperen
dc.contributor.departmentElectrical Engineering Programen
dc.identifier.journal2017 Learning and Technology Conference (L&T) - The MakerSpace: from Imagining to Making!en
dc.eprint.versionPost-printen
dc.contributor.institutionECE Department, Effat University Jeddah, Saudi Arabiaen
kaust.authorHussain, Muhammad Mustafaen
All Items in KAUST are protected by copyright, with all rights reserved, unless otherwise indicated.