Systematic errors in digital volume correlation due to the self-heating effect of a laboratory x-ray CT scanner

Handle URI:
http://hdl.handle.net/10754/623920
Title:
Systematic errors in digital volume correlation due to the self-heating effect of a laboratory x-ray CT scanner
Authors:
Wang, B; Pan, B; Tao, Ran ( 0000-0001-5920-3185 ) ; Lubineau, Gilles ( 0000-0002-7370-6093 )
Abstract:
The use of digital volume correlation (DVC) in combination with a laboratory x-ray computed tomography (CT) for full-field internal 3D deformation measurement of opaque materials has flourished in recent years. During x-ray tomographic imaging, the heat generated by the x-ray tube changes the imaging geometry of x-ray scanner, and further introduces noticeable errors in DVC measurements. In this work, to provide practical guidance high-accuracy DVC measurement, the errors in displacements and strains measured by DVC due to the self-heating for effect of a commercially available x-ray scanner were experimentally investigated. The errors were characterized by performing simple rescan tests with different scan durations. The results indicate that the maximum strain errors associated with the self-heating of the x-ray scanner exceed 400 µε. Possible approaches for minimizing or correcting these displacement and strain errors are discussed. Finally, a series of translation and uniaxial compression tests were performed, in which strain errors were detected and then removed using pre-established artificial dilatational strain-time curve. Experimental results demonstrate the efficacy and accuracy of the proposed strain error correction approach.
KAUST Department:
Physical Sciences and Engineering (PSE) Division
Citation:
Wang B, Pan B, Tao R, Lubineau G (2017) Systematic errors in digital volume correlation due to the self-heating effect of a laboratory x-ray CT scanner. Measurement Science and Technology 28: 055402. Available: http://dx.doi.org/10.1088/1361-6501/aa60ad.
Publisher:
IOP Publishing
Journal:
Measurement Science and Technology
Issue Date:
15-Feb-2017
DOI:
10.1088/1361-6501/aa60ad
Type:
Article
ISSN:
0957-0233; 1361-6501
Sponsors:
This work is supported by the National Natural Science Foundation of China (Grant nos. 11272032, 11322220, 11427802 and 11632010), the Aeronautical Science Foundation of China (2016ZD51034), Beijing Nova Program (xx2014B034). We also thank King Abdullah University of Science and Technology (KAUST) for its support.
Additional Links:
http://iopscience.iop.org/article/10.1088/1361-6501/aa60ad/meta;jsessionid=C2843D59A262478F1B4E84291727E578.c1.iopscience.cld.iop.org
Appears in Collections:
Articles; Physical Sciences and Engineering (PSE) Division

Full metadata record

DC FieldValue Language
dc.contributor.authorWang, Ben
dc.contributor.authorPan, Ben
dc.contributor.authorTao, Ranen
dc.contributor.authorLubineau, Gillesen
dc.date.accessioned2017-05-31T11:23:13Z-
dc.date.available2017-05-31T11:23:13Z-
dc.date.issued2017-02-15en
dc.identifier.citationWang B, Pan B, Tao R, Lubineau G (2017) Systematic errors in digital volume correlation due to the self-heating effect of a laboratory x-ray CT scanner. Measurement Science and Technology 28: 055402. Available: http://dx.doi.org/10.1088/1361-6501/aa60ad.en
dc.identifier.issn0957-0233en
dc.identifier.issn1361-6501en
dc.identifier.doi10.1088/1361-6501/aa60aden
dc.identifier.urihttp://hdl.handle.net/10754/623920-
dc.description.abstractThe use of digital volume correlation (DVC) in combination with a laboratory x-ray computed tomography (CT) for full-field internal 3D deformation measurement of opaque materials has flourished in recent years. During x-ray tomographic imaging, the heat generated by the x-ray tube changes the imaging geometry of x-ray scanner, and further introduces noticeable errors in DVC measurements. In this work, to provide practical guidance high-accuracy DVC measurement, the errors in displacements and strains measured by DVC due to the self-heating for effect of a commercially available x-ray scanner were experimentally investigated. The errors were characterized by performing simple rescan tests with different scan durations. The results indicate that the maximum strain errors associated with the self-heating of the x-ray scanner exceed 400 µε. Possible approaches for minimizing or correcting these displacement and strain errors are discussed. Finally, a series of translation and uniaxial compression tests were performed, in which strain errors were detected and then removed using pre-established artificial dilatational strain-time curve. Experimental results demonstrate the efficacy and accuracy of the proposed strain error correction approach.en
dc.description.sponsorshipThis work is supported by the National Natural Science Foundation of China (Grant nos. 11272032, 11322220, 11427802 and 11632010), the Aeronautical Science Foundation of China (2016ZD51034), Beijing Nova Program (xx2014B034). We also thank King Abdullah University of Science and Technology (KAUST) for its support.en
dc.publisherIOP Publishingen
dc.relation.urlhttp://iopscience.iop.org/article/10.1088/1361-6501/aa60ad/meta;jsessionid=C2843D59A262478F1B4E84291727E578.c1.iopscience.cld.iop.orgen
dc.subjectdigital volume correlationen
dc.subjectself-heating effecten
dc.subjectx-ray CTen
dc.titleSystematic errors in digital volume correlation due to the self-heating effect of a laboratory x-ray CT scanneren
dc.typeArticleen
dc.contributor.departmentPhysical Sciences and Engineering (PSE) Divisionen
dc.identifier.journalMeasurement Science and Technologyen
dc.contributor.institutionInstitute of Solid Mechanics, Beihang University, Beijing 100191, People's Republic of Chinaen
kaust.authorTao, Ranen
kaust.authorLubineau, Gillesen
All Items in KAUST are protected by copyright, with all rights reserved, unless otherwise indicated.