Hollow fiber membrane lumen modified by polyzwitterionic grafting

Handle URI:
http://hdl.handle.net/10754/622298
Title:
Hollow fiber membrane lumen modified by polyzwitterionic grafting
Authors:
Le, Ngoc Lieu ( 0000-0002-4634-7267 ) ; Quilitzsch, Mathias; Cheng, Hong ( 0000-0002-4943-9060 ) ; Hong, Pei-Ying ( 0000-0002-4474-6600 ) ; Ulbricht, Mathias; Nunes, Suzana Pereira ( 0000-0002-3669-138X ) ; Chung, Neal Tai-Shung ( 0000-0003-3704-8609 )
Abstract:
In this study, we demonstrate an effective way to modify the lumen of polyetherimide hollow fibers by grafting zwitterionic poly(sulfobetaine) to increase the membrane resistance to fouling. Surface-selective grafting of the protective hydrogel layers has been achieved in a facile two-step process. The first step is the adsorption of a macromolecular redox co-initiator on the lumen-side surface of the membrane, which in the second step, after flushing the lumen of the membrane with a solution comprising monomers and a complementary redox initiator, triggers the in situ cross-linking copolymerization at room temperature. The success of grafting reaction has been verified by the surface elemental analyses using X-ray photoelectron spectroscopy (XPS) and the surface charge evaluation using zeta potential measurements. The hydrophilicity of the grafted porous substrate is improved as indicated by the change of contact angle value from 44° to 30°, due to the hydration layer on the surface produced by the zwitterionic poly(sulfobetaine). Compared to the pristine polyetherimide (PEI) substrate, the poly(sulfobetaine) grafted substrates exhibit high fouling resistance against bovine serum albumin (BSA) adsorption, E. coli attachment and cell growth on the surface. Fouling minimization in the lumen is important for the use of hollow fibers in different processes. For instance, it is needed to preserve power density of pressure-retarded osmosis (PRO). In high-pressure PRO tests, a control membrane based on PEI with an external polyamide selective layer was seriously fouled by BSA, leading to a high water flux drop of 37%. In comparison, the analogous membrane, whose lumen was modified with poly(sulfobetaine), not only had a less water flux decline but also had better flux recovery, up to 87% after cleaning and hydraulic pressure impulsion. Clearly, grafting PRO hollow fiber membranes with zwitterionic polymeric hydrogels as a protective layer potentially sustains PRO performance for power generation. © 2016 Elsevier B.V.
KAUST Department:
Biological and Environmental Sciences and Engineering (BESE) Division
Citation:
Lieu Le N, Quilitzsch M, Cheng H, Hong P-Y, Ulbricht M, et al. (2017) Hollow fiber membrane lumen modified by polyzwitterionic grafting. Journal of Membrane Science 522: 1–11. Available: http://dx.doi.org/10.1016/j.memsci.2016.08.038.
Publisher:
Elsevier BV
Journal:
Journal of Membrane Science
Issue Date:
24-Aug-2016
DOI:
10.1016/j.memsci.2016.08.038
Type:
Article
ISSN:
0376-7388
Sponsors:
The authors thank KAUST's Core Labs for their help on equipment and analysis. Thanks are due to Dr. N.M.S. Bettahalli for his kind help on PRO system. The work was supported by King Abdullah University of Science and Technology (KAUST). MQ and MU acknowledge financial support for their work by the German Federal Ministry of Education and Research (BMBF grant 02WA1261A). NLL is grateful for funding of her stay in Germany in the frame of the “Green Talents” program of BMBF, which helped to initiate this research.
Additional Links:
http://www.sciencedirect.com/science/article/pii/S0376738816313874
Appears in Collections:
Articles; Biological and Environmental Sciences and Engineering (BESE) Division

Full metadata record

DC FieldValue Language
dc.contributor.authorLe, Ngoc Lieuen
dc.contributor.authorQuilitzsch, Mathiasen
dc.contributor.authorCheng, Hongen
dc.contributor.authorHong, Pei-Yingen
dc.contributor.authorUlbricht, Mathiasen
dc.contributor.authorNunes, Suzana Pereiraen
dc.contributor.authorChung, Neal Tai-Shungen
dc.date.accessioned2017-01-02T09:08:24Z-
dc.date.available2017-01-02T09:08:24Z-
dc.date.issued2016-08-24en
dc.identifier.citationLieu Le N, Quilitzsch M, Cheng H, Hong P-Y, Ulbricht M, et al. (2017) Hollow fiber membrane lumen modified by polyzwitterionic grafting. Journal of Membrane Science 522: 1–11. Available: http://dx.doi.org/10.1016/j.memsci.2016.08.038.en
dc.identifier.issn0376-7388en
dc.identifier.doi10.1016/j.memsci.2016.08.038en
dc.identifier.urihttp://hdl.handle.net/10754/622298-
dc.description.abstractIn this study, we demonstrate an effective way to modify the lumen of polyetherimide hollow fibers by grafting zwitterionic poly(sulfobetaine) to increase the membrane resistance to fouling. Surface-selective grafting of the protective hydrogel layers has been achieved in a facile two-step process. The first step is the adsorption of a macromolecular redox co-initiator on the lumen-side surface of the membrane, which in the second step, after flushing the lumen of the membrane with a solution comprising monomers and a complementary redox initiator, triggers the in situ cross-linking copolymerization at room temperature. The success of grafting reaction has been verified by the surface elemental analyses using X-ray photoelectron spectroscopy (XPS) and the surface charge evaluation using zeta potential measurements. The hydrophilicity of the grafted porous substrate is improved as indicated by the change of contact angle value from 44° to 30°, due to the hydration layer on the surface produced by the zwitterionic poly(sulfobetaine). Compared to the pristine polyetherimide (PEI) substrate, the poly(sulfobetaine) grafted substrates exhibit high fouling resistance against bovine serum albumin (BSA) adsorption, E. coli attachment and cell growth on the surface. Fouling minimization in the lumen is important for the use of hollow fibers in different processes. For instance, it is needed to preserve power density of pressure-retarded osmosis (PRO). In high-pressure PRO tests, a control membrane based on PEI with an external polyamide selective layer was seriously fouled by BSA, leading to a high water flux drop of 37%. In comparison, the analogous membrane, whose lumen was modified with poly(sulfobetaine), not only had a less water flux decline but also had better flux recovery, up to 87% after cleaning and hydraulic pressure impulsion. Clearly, grafting PRO hollow fiber membranes with zwitterionic polymeric hydrogels as a protective layer potentially sustains PRO performance for power generation. © 2016 Elsevier B.V.en
dc.description.sponsorshipThe authors thank KAUST's Core Labs for their help on equipment and analysis. Thanks are due to Dr. N.M.S. Bettahalli for his kind help on PRO system. The work was supported by King Abdullah University of Science and Technology (KAUST). MQ and MU acknowledge financial support for their work by the German Federal Ministry of Education and Research (BMBF grant 02WA1261A). NLL is grateful for funding of her stay in Germany in the frame of the “Green Talents” program of BMBF, which helped to initiate this research.en
dc.publisherElsevier BVen
dc.relation.urlhttp://www.sciencedirect.com/science/article/pii/S0376738816313874en
dc.subjectFoulingen
dc.subjectGraftingen
dc.subjectPoly(sulfobetaine)en
dc.subjectPressure-retarded osmosisen
dc.subjectZwitterionicen
dc.titleHollow fiber membrane lumen modified by polyzwitterionic graftingen
dc.typeArticleen
dc.contributor.departmentBiological and Environmental Sciences and Engineering (BESE) Divisionen
dc.identifier.journalJournal of Membrane Scienceen
dc.contributor.institutionLehrstuhl für Technische Chemie II, Universität Duisburg-Essen, Essen, 45117, Germanyen
dc.contributor.institutionDepartment of Chemical and Biomolecular Engineering, National University of Singapore, 4 Engineering Drive 4, Singapore, 117585, Singaporeen
kaust.authorLe, Ngoc Lieuen
kaust.authorCheng, Hongen
kaust.authorHong, Pei-Yingen
kaust.authorNunes, Suzana Pereiraen
kaust.authorChung, Neal Tai-Shungen
All Items in KAUST are protected by copyright, with all rights reserved, unless otherwise indicated.