Polymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Technique

Handle URI:
http://hdl.handle.net/10754/621410
Title:
Polymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Technique
Authors:
Park, Jihoon ( 0000-0003-1204-9568 ) ; Kim, Eugene
Abstract:
© 2015 Copyright Taylor & Francis Group, LLC. Floating-off film-transfer technique was used for the formation of semiconducting polymer multi-layers and the effect on the performance of polymer light-emitting diode (PLED) was studied. This method made it possible to avoid the solvent compatibility problem that was typically encountered in successive coating of polymeric multilayer by solution processing. F8BT and MEH-PPV were used for electron transporting layer (ETL) and for emissive layer, respectively. Current-voltage-luminance characteristics and luminescence efficiency results showed that the insertion of ETL by floating-off film-transfer technique followed by proper heat treatment resulted in a significant improvement in PLED operation due to its electron-transporting and hole-blocking abilities.
KAUST Department:
Functional Nanomaterials and Devices Research Group
Citation:
Park JH, Kim E (2015) Polymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Technique. Molecular Crystals and Liquid Crystals 623: 351–357. Available: http://dx.doi.org/10.1080/15421406.2015.1036497.
Publisher:
Informa UK Limited
Journal:
Molecular Crystals and Liquid Crystals
Issue Date:
22-Dec-2015
DOI:
10.1080/15421406.2015.1036497
Type:
Article
ISSN:
1542-1406; 1563-5287
Appears in Collections:
Articles

Full metadata record

DC FieldValue Language
dc.contributor.authorPark, Jihoonen
dc.contributor.authorKim, Eugeneen
dc.date.accessioned2016-11-03T08:28:36Z-
dc.date.available2016-11-03T08:28:36Z-
dc.date.issued2015-12-22en
dc.identifier.citationPark JH, Kim E (2015) Polymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Technique. Molecular Crystals and Liquid Crystals 623: 351–357. Available: http://dx.doi.org/10.1080/15421406.2015.1036497.en
dc.identifier.issn1542-1406en
dc.identifier.issn1563-5287en
dc.identifier.doi10.1080/15421406.2015.1036497en
dc.identifier.urihttp://hdl.handle.net/10754/621410-
dc.description.abstract© 2015 Copyright Taylor & Francis Group, LLC. Floating-off film-transfer technique was used for the formation of semiconducting polymer multi-layers and the effect on the performance of polymer light-emitting diode (PLED) was studied. This method made it possible to avoid the solvent compatibility problem that was typically encountered in successive coating of polymeric multilayer by solution processing. F8BT and MEH-PPV were used for electron transporting layer (ETL) and for emissive layer, respectively. Current-voltage-luminance characteristics and luminescence efficiency results showed that the insertion of ETL by floating-off film-transfer technique followed by proper heat treatment resulted in a significant improvement in PLED operation due to its electron-transporting and hole-blocking abilities.en
dc.publisherInforma UK Limiteden
dc.subjectElectron-transporting layeren
dc.subjectF8BTen
dc.subjectFloating-off film transferen
dc.subjectHeat treatmenten
dc.subjectMEH-PPVen
dc.subjectPolymer light-emitting diodeen
dc.titlePolymer Light-Emitting Diode Prepared by Floating-Off Film-Transfer Techniqueen
dc.typeArticleen
dc.contributor.departmentFunctional Nanomaterials and Devices Research Groupen
dc.identifier.journalMolecular Crystals and Liquid Crystalsen
dc.contributor.institutionDepartment of Information Display Engineering, Hongik University, Seoul, South Koreaen
dc.contributor.institutionDepartment of Applied Science, Hongik University, Mapo-ku, Seoul, South Koreaen
kaust.authorPark, Jihoonen
All Items in KAUST are protected by copyright, with all rights reserved, unless otherwise indicated.