Pinning, de-pinning and re-pinning of a slowly varying rivulet

Handle URI:
http://hdl.handle.net/10754/599197
Title:
Pinning, de-pinning and re-pinning of a slowly varying rivulet
Authors:
Paterson, C.; Wilson, S.K.; Duffy, B.R.
Abstract:
The solutions for the unidirectional flow of a thin rivulet with prescribed volume flux down an inclined planar substrate are used to describe the locally unidirectional flow of a rivulet with constant width (i.e. pinned contact lines) but slowly varying contact angle as well as the possible pinning and subsequent de-pinning of a rivulet with constant contact angle and the possible de-pinning and subsequent re-pinning of a rivulet with constant width as they flow in the azimuthal direction from the top to the bottom of a large horizontal cylinder. Despite being the same locally, the global behaviour of a rivulet with constant width can be very different from that of a rivulet with constant contact angle. In particular, while a rivulet with constant non-zero contact angle can always run from the top to the bottom of the cylinder, the behaviour of a rivulet with constant width depends on the value of the width. Specifically, while a narrow rivulet can run all the way from the top to the bottom of the cylinder, a wide rivulet can run from the top of the cylinder only to a critical azimuthal angle. The scenario in which the hitherto pinned contact lines of the rivulet de-pin at the critical azimuthal angle and the rivulet runs from the critical azimuthal angle to the bottom of the cylinder with zero contact angle but slowly varying width is discussed. The pinning and de-pinning of a rivulet with constant contact angle, and the corresponding situation involving the de-pinning and re-pinning of a rivulet with constant width at a non-zero contact angle which generalises the de-pinning at zero contact angle discussed earlier, are described. In the latter situation, the mass of fluid on the cylinder is found to be a monotonically increasing function of the constant width. © 2013 Elsevier Masson SAS. All rights reserved.
Citation:
Paterson C, Wilson SK, Duffy BR (2013) Pinning, de-pinning and re-pinning of a slowly varying rivulet. European Journal of Mechanics - B/Fluids 41: 94–108. Available: http://dx.doi.org/10.1016/j.euromechflu.2013.02.006.
Publisher:
Elsevier BV
Journal:
European Journal of Mechanics - B/Fluids
KAUST Grant Number:
KUK-C1-013-04
Issue Date:
Sep-2013
DOI:
10.1016/j.euromechflu.2013.02.006
Type:
Article
ISSN:
0997-7546
Sponsors:
The first author (CP) gratefully acknowledges the financial support of the University of Strathclyde via a Postgraduate Research Scholarship. Part of this work was undertaken while the corresponding author (SKW) was a Visiting Fellow in the Department of Mechanical and Aerospace Engineering, School of Engineering and Applied Science, Princeton University, USA, and part of it was undertaken while he was a Visiting Fellow in the Oxford Centre for Collaborative Applied Mathematics (OCCAM), Mathematical Institute, University of Oxford, United Kingdom. This publication was based on work supported in part by Award No KUK-C1-013-04, made by King Abdullah University of Science and Technology (KAUST). A preliminary version of this work, discussing only the de-pinning of a rivulet with constant width at zero contact angle, appears as OCCAM preprint number 12/43 [35].
Appears in Collections:
Publications Acknowledging KAUST Support

Full metadata record

DC FieldValue Language
dc.contributor.authorPaterson, C.en
dc.contributor.authorWilson, S.K.en
dc.contributor.authorDuffy, B.R.en
dc.date.accessioned2016-02-25T13:54:43Zen
dc.date.available2016-02-25T13:54:43Zen
dc.date.issued2013-09en
dc.identifier.citationPaterson C, Wilson SK, Duffy BR (2013) Pinning, de-pinning and re-pinning of a slowly varying rivulet. European Journal of Mechanics - B/Fluids 41: 94–108. Available: http://dx.doi.org/10.1016/j.euromechflu.2013.02.006.en
dc.identifier.issn0997-7546en
dc.identifier.doi10.1016/j.euromechflu.2013.02.006en
dc.identifier.urihttp://hdl.handle.net/10754/599197en
dc.description.abstractThe solutions for the unidirectional flow of a thin rivulet with prescribed volume flux down an inclined planar substrate are used to describe the locally unidirectional flow of a rivulet with constant width (i.e. pinned contact lines) but slowly varying contact angle as well as the possible pinning and subsequent de-pinning of a rivulet with constant contact angle and the possible de-pinning and subsequent re-pinning of a rivulet with constant width as they flow in the azimuthal direction from the top to the bottom of a large horizontal cylinder. Despite being the same locally, the global behaviour of a rivulet with constant width can be very different from that of a rivulet with constant contact angle. In particular, while a rivulet with constant non-zero contact angle can always run from the top to the bottom of the cylinder, the behaviour of a rivulet with constant width depends on the value of the width. Specifically, while a narrow rivulet can run all the way from the top to the bottom of the cylinder, a wide rivulet can run from the top of the cylinder only to a critical azimuthal angle. The scenario in which the hitherto pinned contact lines of the rivulet de-pin at the critical azimuthal angle and the rivulet runs from the critical azimuthal angle to the bottom of the cylinder with zero contact angle but slowly varying width is discussed. The pinning and de-pinning of a rivulet with constant contact angle, and the corresponding situation involving the de-pinning and re-pinning of a rivulet with constant width at a non-zero contact angle which generalises the de-pinning at zero contact angle discussed earlier, are described. In the latter situation, the mass of fluid on the cylinder is found to be a monotonically increasing function of the constant width. © 2013 Elsevier Masson SAS. All rights reserved.en
dc.description.sponsorshipThe first author (CP) gratefully acknowledges the financial support of the University of Strathclyde via a Postgraduate Research Scholarship. Part of this work was undertaken while the corresponding author (SKW) was a Visiting Fellow in the Department of Mechanical and Aerospace Engineering, School of Engineering and Applied Science, Princeton University, USA, and part of it was undertaken while he was a Visiting Fellow in the Oxford Centre for Collaborative Applied Mathematics (OCCAM), Mathematical Institute, University of Oxford, United Kingdom. This publication was based on work supported in part by Award No KUK-C1-013-04, made by King Abdullah University of Science and Technology (KAUST). A preliminary version of this work, discussing only the de-pinning of a rivulet with constant width at zero contact angle, appears as OCCAM preprint number 12/43 [35].en
dc.publisherElsevier BVen
dc.subjectDe-pinningen
dc.subjectPinningen
dc.subjectRe-pinningen
dc.subjectRivulet flowen
dc.subjectThin-film flow Contact linesen
dc.titlePinning, de-pinning and re-pinning of a slowly varying rivuleten
dc.typeArticleen
dc.identifier.journalEuropean Journal of Mechanics - B/Fluidsen
dc.contributor.institutionUniversity of Strathclyde, Glasgow, United Kingdomen
dc.contributor.institutionUniversity of Oxford, Oxford, United Kingdomen
kaust.grant.numberKUK-C1-013-04en
All Items in KAUST are protected by copyright, with all rights reserved, unless otherwise indicated.